Camera Base Protectors

Note: If you have more than one battery, additional protectors for the battery can be purchased by adding the 'Battery Only' option for your camera.

Protect the base of your camera from scratches with our robust leather effect vinyl protectors.

The black version nicely matches the leather effect of the camera body.

The clear version adds protection without changing the appearance, it's barely noticeable when applied.

100% compatible with our Slim Skin and other cases.

To apply:

1. Thoroughly clean the camera base with lens cleaner or similar, removing any dirt and grease
2. Before removing the backing, align each piece on the camera base and check the rotation and alignment is correct.
3. Remove the sticky backing from the piece you wish to apply
4. Working from an edge, carefully place and align the piece to the camera base
5. Carefully lay the piece down, keeping slight tension and checking the alignment as you go
6. Once fully laid on the camera base, check for any bumps or ripples before lightly pressing to fully adhere
   

The protector can be re-applied several times on its first application to help get the best fit. The protector has a good thickness and adhesion so unlike a phone protector screen you have more than one attempt to get it right.

Should you wish to remove the protector, carefully use a fingernail or similar to work under an edge, then slowly and carefully pull up until the protector is removed. It may not be re-usable if it has been on the camera for some time.